We hope you love the products we recommend and just so you know that as an Amazon Associate & J&P Cycles affiliate, MyEngineNeeds may earn from qualifying purchases.
The aftermath of World War II crisis lead to a major boom in the engine oil research industry. It went on until the 1960s because the defence sector wanted to create efficient means of transport from a military advantage perspective. Gradually, the trend inspired automobile and other transportation sectors to do the same.
For instance, during the 60s phase, jet fuel development went under a major overhaul. The U.S. Department of defense was able to undergo a successful transition of aircraft turbine engines that were powered by the synthetic engine oil. Likewise, the defense industry created a similarly powerful alternative to mineral engine oil based land vehicles. After all, a combat advantage over adversaries is onlycomplete when both land and air forces are performing at the same level from a strategic point of view.
Speaking of land vehicles, ATVs underwent some major changes. Since they are light, easy to operate and normally less susceptible to environmental changes, people prefer them motorcycle on any given day.
That’s where Polaris OEM series engine oil comes in. The company started a little late as compared to their founding fathers, but they learned a lot. Polaris was also one of the first synthetic engine oil manufacturers for ATVs. In addition, they met the requirementsprescribed by the American Petroleum Institute because of the oil’s high resistance to extremely cold temperature spikes.
It won’t be an understatement to say that Polaris engine oil has a high demand audience belonging to off-road racing, dirt bike racingand other categories where both the engine and the vehicle has to undergo brutal usage. For that very purpose, there had to be a bettersubstitute to help fulfil the needs of off-road hobbyists.
- 2 quarts or 4 Pints of PS-4 5W-50 Oil = 2 quarts of PS-4 Oil
- 1 Genuine Polaris 2540086 Oil Filter
Features of Polaris OEM PS4:
- Ideal for 4 stroke engine ATVs.
- Formulated for long-lasting performance.
- Guaranteed low wear n’ tear effect; thanks to a high viscosity chemical composition of this oil.
- Regularly endorsed by Sportsman, ACE, RZR and many other ATV enthusiasts.
- Provides optimal results irrespective of extremely hot or cold weather.
- Operational temperature ranges between -40 to 40 degrees!
- Compatible with Polaris Slingshot and Polaris ATVs.
On a side note, Polaris Slingshot is not a very common vehicle. The ownership is scarce because that particular car is extremelyexpensive. In some parts of the world, the price can go up to 9 million, i.e. if you convert the U.S. dollar to that country’slocal currency. In such regions, Polaris owners normally don’t use Polaris OEM PS-4 synthetic engine oil. They go for a slightlyexpensive variation because they can’t afford to take any risks.
If you are an ATV owner from a colder area where temperatures are usually low for the most part of the year, you should use the 0W version of this engine oil. According to Polaris engine oil officials, the 0W series product lineup is created for those Polaris ATVs that have to withstand snowy weather conditions.
General Results are Somewhat Pleasing:
While reviewing Polaris OEM PS-4 Plus Synthetic Engine Oil, we noticed that our sequential tests touted out 75% more engine protection. This statement was recorded after using the engine oil for a few weeks at irregular intervals, rather than following a specific usage pattern.
What’s particularly surprising about Polaris full synthetic engine oil is its sludge free chemical properties. Further analysis also helped us to discover that Polaris Co. specially engineered the oil with detergents and dispersants that prevent sludge formation over prolonged use.
Likewise, there was minimal slick formation after the engine oil compartment was emptied. We wanted to take a closer look at the oil’s overall color, viscosity, and retention after it was poured into the drain bowl.
In general, it was satisfactory experience and we were more than pleased with Polaris’ performance.
New Vehicle Owners, Don’t Forget to Break In!
Yes, this is the most important part of this Polaris OEM Ps-4 synthetic engine oil review. If you just bought a new ATV, make sure that you have changed its stock oil and replaced it with this one. Polaris synthetic oil takes well over 20 hours for the vehicle to successfully break in.
In some cars/ ATVs, the break-in time varies. However, what’s important is that you’re going to have to go through a tank or two of gasoline to let the engine oil properly “sit in.” After the vehicle is broken into, you will notice efficient engine performance.
While you are at it, make sure that you are not over accelerating your ATV. We noted that excessive acceleration caused the engine to heat up over 3 hours of non-stop driving. This phenomenon tends to damage internal engine fittings.
Most importantly, there is no limit on completing the active drive hours for new vehicles. By “20 – 25” hours, we are not pushing you tohop on to your ATV and take a ride for a full day. You can take rest, drive at your leisure and take note of engine readings as you makeyour rounds.
- 2 quarts or 4 Pints of PS-4 5W-50 Oil = 2 quarts of PS-4 Oil
- 1 Genuine Polaris 2540086 Oil Filter
Are There Any Disadvantages of Polaris OEM Ps-4 Synthetic Engine Oil?
As far as performance is concerned, Polaris Co. backs up its fluids lineup with a warranty. The only setback is the price factor. Polaris does not come cheap. If you are considering buying this engine oil, you should also know that you cannot change your mind later on.
It is not easy to switch from one engine oil brand to another every few months. Therefore make an informed decision rather than an impulsive one. On this note, you should also know that Polaris ATVs and many other company vehicles are not cheap. In fact, they are super expensive. It is also very difficult to buy OEM parts directly from the retailer. Sometimes, you will have to wait for well over a month for a replacement part to arrive.
For more details on Polaris specific products and the company’s synthetic engine oil variants, make sure to go through the comments section below. If you have any query, don’t hesitate in writing to us through an email. You can also go to different ATV forums to gather general opinion about Polaris OEM Ps-4 synthetic engine oil before buying it for the first time. Good luck!
The Review
Polaris PS4
As far as performance is concerned, Polaris Co. backs up its fluids line up with a warranty. The only setback is the price factor. Polaris does not come cheap. What’s particularly surprising about Polaris full synthetic engine oil is its sludge free chemical properties. Further analysis also helped us to discover that Polaris Co. specially engineered the oil with detergents and dispersants that prevent sludge formation over prolonged use.
PROS
- Ideal for 4 stroke engine ATVs.
- Guaranteed low wear n’ tear effect; thanks to a high viscosity chemical composition of this oil.
- Formulated for long-lasting performance.
- Regularly endorsed by Sportsman, ACE, RZR and many other ATV enthusiasts.
- Provides optimal results irrespective of extremely hot or cold weather.
CONS
- The only setback is the price factor as it does not come cheap.
Last update on 2022-11-25 / Affiliate links / Images from Amazon Product Advertising API
I quote from the article, “to take a closer look at the oil’s overall color, viscosity, and retention after it was poured into the drain bowl.” Other than ‘color’ being mentioned in the above quote no other instance of ‘color’ can be found in article. The ‘viscosity’ is labeled on the oil”s container, I did not note any laboratory tests to confirm or deny the ‘viscosity’ on the label. I am not familiar with the ‘retention’ protocol. Is this a new protocol from the Society of Petroleum Engineers?