We hope you love the products we recommend and just so you know that as an Amazon Associate & J&P Cycles affiliate, MyEngineNeeds may earn from qualifying purchases.
The Lucas Oil marine grease is a large 14oz cartridge that fits into most standard grease guns and contains a heavy-duty lithium complex formula. The unique additives inside Lucas Oil marine grease works under extreme marine operating conditions. This means Lucas Oil marine grease can protect metals in salt and fresh water environments.
The Lucas Oil is a marine-grade grease that is 100% waterproof and protects any metal material from oxidization. It’s a multipurpose product that can be used for vehicle wheel bearings, trailer chassis and boat trailer lubrication and has unique additives such as anti-wear to protect metals from corrosion.
Lucas Oil has a high-grade viscosity so the grease will keep its thickness even in extreme weather conditions. This grease is a waterproof formula that doesn’t wash off even during heavy rain or when you drive through deep waters.
This marine-grade grease has an exceptionally high-pressure capacity with a weld point of 500kg. If you want to know what other applications this grease can be used for, watch this YouTube video that explains what Lucas Oil is for.
In A Hurry – Check Out Availability Here
| Preview | Product | Rating | |
|---|---|---|---|
 | Lucas Oil 10682 Marine Grease - 3 Ounce (Pack of... | Check Availability << |
Pros
- NLGI certified
- The drop point is 550°F
- Can be used on 4×4 ball joints and tie rods
- High viscosity index
- Maximum lubrication capabilities
- Works in salt and fresh water environments
Cons
- Consistency is too thick for standard greasing tasks
- Poor packaging
Overview of Lucas Marine Grease
- Provides rust and corrosion protection in both fresh water and salt water environments
- Long-lasting and effective water resistance
Lucas Oil marine grease has a Timken load of 80lb and a dropping point of 540lb which means it can handle extreme force. This grease has a unique formula that includes additives to protect metal materials from rust with no wash-out.
The Lucas Oil also reduces friction by lubricating parts to minimize wear and maximize performance. Lucas’ Oil cartridge has dimensions of 9.25″x2″ which means it can fit into any standard sized grease gun.
This grease has the perfect consistency that will hold its thickness in low or high temperatures. It’s also lithium-based so it gives the metal an added layer of protection against water damage.
Who is this Product For?
The Lucas Oil marine grease cartridge is suitable for industrial and recreational use as it’s a multipurpose grease. It’s designed to withstand extreme conditions so it can be used to lubricate and grease a variety of applications.
Typically, the Lucas Oil marine grease is used in the automotive industry to lubricate wheel bearings and trailer chassis so it’s suitable for mechanics & car enthusiasts. But it can also be used to protect metal materials on boats so sailors and fishermen might find this product useful to maintain boat parts.
For the construction industry, the Lucas Oil marine grease can be used to lubricate parts of machinery to optimize any application’s performance.
What’s Included?
Lucas Oil marine grease doesn’t come with any added accessories but you can purchase a grease gun from the same brand with the exact dimensions to fit this cartridge.
The best grease gun to purchase would be the Lucas HD application. It comes with a durable casing and it has a 3-way loading application. This grease gun includes an 18″ whip hose and angled tube to make it easier to squeeze the grease into confined spaces.
How to Use the Lucas Oil Marine Grease Cartridge
Using the Lucas Oil marine grease cartridge is effortless. Simply open the top of your grease gun and insert the cartridge upside down into the cylinder while pulling the bottom of the application’s pump. Ensure the perforated opening is facing up.
Remove the perforated opening of the cartridge once it’s inside the cylinder and then put the lid of your grease gun back onto the application. Release the pump of your grease gun as the spring load will push the grease out of the canister.
Place a paper towel down onto a flat surface and lay the grease gun down with the nozzle over the towel. This is simply to ensure the grease goes onto the paper towel and not onto any other surfaces. Squeeze your grease gun trigger several times until the product squirts out of the nozzle.
You can now apply the Lucas Oil 10320 marine grease to any application using the grease gun.
Alternative Product
If you can’t find the Lucas Oil marine grease due to its popularity you can always opt for Valvoline VV985. It’s basically the same type of heavy-duty grease Lucas Oil offers but the only difference is this is a synthetic formula.
Valvoline VV985 has lithium and molybdenum complex which means it can protect applications from water-based corrosion & dirt. The Valvoline heavy duty grease is suitable to use in the industrial and the automotive industry.
This grease is used to lubricate wheel bearings, trailer chassis, disc brakes and U-joints. The only drawback is that it’s notwater-insoluble enough for marine use. But the grease keeps its viscosity in high and low temperatures. Valvoline is an NLGI certified product so you’re guaranteed premium multipurpose grease that will protect any type of metal from wear.
- Provides rust and corrosion protection in both fresh water and salt water environments
- Long-lasting and effective water resistance
Conclusion
The Lucas Oil is the marine grease you need for boats, trailers and high-performance vehicles because it keeps its viscosity in any weather conditions. It’s a long-lasting formula that reduces maintenance intervals by protecting your applications from oxidization and contamination.
Lucas’ Oil canister is well manufactured so that it fits perfectly inside any standard grease gun to make it easier for you to apply the product onto your application. A little of the grease goes a long way so this 14oz canister will last which means it’s also exceptionally economical.
The Lucas Oil marine grease was designed for people like you who want to protect and extend the life of any boat, automobile &construction application. So, if you’re looking for heavy-duty multipurpose grease the Lucas Oil 10320 marine grease is the premium formula for the job.
The Review
Lucas Marine grease
Lucas oil canister is well manufactured so that it fits perfectly inside any standard grease gun to make it easier for you to apply the product onto your application. This marine grease was designed for people like you who want to protect and extend the life of any boat, automobile & construction application.
PROS
- NLGI certified
- The drop point is 550°F
- Can be used on 4x4 ball joints and tie rods
- Works in salt and fresh water environments
CONS
- Consistency is too thick for standard greasing tasks
Last update on 2023-05-25 / Affiliate links / Images from Amazon Product Advertising API
